HDD Head Swap Tool Kit B

Description

This is a safe and easy way to replace the heads on your hard drive. These tools ensure a non-contact head replacement. Non-contact head replacement means that there is no contact between the heads or between the head and the disc during the removal of the donor head and the mounting of the head on the patient driver.

The conventional technique of replacing the magnetic head means the contact between the magnetic head itself and the contact of the magnetic head with the magnetic disk in the data area. These problems are particularly exposed to drives that suffer from some physical damage (head impact).

The head can be transferred from the donor to the patient’s hard drive in a few simple steps. During head replacement, the heads do not touch each other or come into contact with the disc. Each changer tool is designed for a specific brand and model of hard drive because the mechanical structure of the different hard drives does not match.

This head replacement tool (Head Combs) can be used to replace the heads of almost all 2.5-inch and 3.5-inch hard drives whose heads are parked on ramps. These head replacement tools are used to ensure that the heads do not touch each other during the replacement process and that they are easy to install back to the ramp.

These tools do not address head compatibility issues. They will only ensure that the heads are easily replaced on supported drives.

List of Head Replacement Tools families and models:

For Seagate Hard Drive Head Combs:
ST 2-5: for Seagate 4TB laptop HDD head comb, ST4000LM016, 5 platters, 10 heads
ST2-1: for Seagate 2.5inch HDDS, 1 platters
ST2-2: for Seagate 2.5inch HDDS, 2 platters
ST2-4: for Seagate 2.5inch HDDS, 4 platters
ST313: for Seagate 3.5inch HDDS, 3 platters
ST332: for Seagate 3.5inch HDDS, 2 platters
ST334: for Seagate 3.5inch HDDS, 4 platters
ST323: for Seagate 3.5inch HDDS, 3 platters, type 2
STES3-5: for Seagate enterprise 3.5inch hard drives, 1-5 platters supported and the ES.3 1-3T hard drives are tested.
ST3 6: for Seagate 3.5inch 8TB hard drives with 6 platters and 12 heads

For Seagate SAS 2.5 Drives
SST21: SAS 2.5inchHDDS, 1 platter
SST22: SAS 2.5inchHDDS, 2 platters
SST23: SAS 2.5inchHDDS, 3 platters

For Western Digital Hard Drive Head Combs:
W2-2: Western Digital 2.5″ HDDS, 2 platters, 3 or 4 heads
W2-3: Western Digital 2.5″ HDDS, 3 platters, 5 or 6 heads
W2-4: Western Digital 2.5″ HDDS, 4 platters, 7 or 8 heads
W2-5: Western Digital 2.5″ HDDs, 5 platters, 9 or 10 heads
W3-2: Western Digital 3.5″ HDDS, 2 platters, 3 or 4 heads
W3-3: Western Digital 3.5″ HDDS, 3 platters, 5 or 6 heads
W3-4: Western Digital 3.5″ HDDS, 4 platters, 7 or 8 heads
W3-5: Western Digital 3.5″ HDDS, 5 platters, 9 or 10 heads
W313: Western Digital 3.5″ HDDS, 3 platters, 5 or 6 heads

W1S: Western Digital HDDS, 1 platters (It is suitable for 2.5″ series hard drives with board numbers 800066 and 800069, etc.)
W2S: Western Digital HDDS, 2 platters (It is suitable for ultra-thin hard disks with board numbers 800065 and 800067, such as WD20SDZW, etc.)

For Hitachi(HGST) Hard Drive Head Combs:
H313: 3.5inch for Hitachi HDDS, 3 platters
H3-5: 3.5inch for Hitachi HDDS, 5 platters
H312: 3.5inch for Hitachi HDDS, 2 platters
H2-2: 2.5inch for Hitachi HDDS, 2 platters
H2-1: 2.5inch for Hitachi HDDS, 1 platter
HUS22: 2.5inch for Hitachi SAS HDDS, 2 platters.

Toshiba Hard Drive Head Combs:
T2-2: Toshiba 2.5″ HDDS, 2 platters
T2-3: Toshiba 2.5″ HDDS, 3 platters
T2-4: Toshiba new 2.5″ hard drives with 4 platters and 8 heads

Fujitsu Hard Drive Head Combs:
FU22: Fujitsu Head Combs: 1 piece, Fujitsu 2.5″ HDDS, 2 platters
FUS22: Fujitsu SAS 2.5″ HDD, 2 platters, 4 heads (S26361-F4006-L114 )

Samsung Hard Drive Head Combs:
SX2-2: Samsung Head Combs: 1 piece, Samsung 2.5″ HDDS, 2 platters
SX2-3: Seagate Samsung 2.5″ HDD, 3 platters, ST2000lm003 2tb laptop drive